Peavey Invective 120 Manual De Operación página 13

MIDI PROGRAM
MIDI Program Changes are used to recall presets. Typically a preset will reconfigure all functions on the amp at
one time. (Programs 9-11 below are exceptions as they only affect the channel.)
NOTE: These messages when recevied will be echoed to the MIDI Out jack for sync'ing with another Invective.
NOTE: The first nine presets are your custom presets. They recall whatever you store with the footswitch.
CHANNEL
Cn data where n=chan-1
(Decimal) (Hex)
0 00h <----------------------------------------preset 1--------------------------------------------------------->
1 01h <----------------------------------------preset 2--------------------------------------------------------->
2 02h <----------------------------------------preset 3--------------------------------------------------------->
3 03h <----------------------------------------preset 4--------------------------------------------------------->
4 04h <----------------------------------------preset 5--------------------------------------------------------->
5 05h <----------------------------------------preset 6--------------------------------------------------------->
6 06h <----------------------------------------preset 7--------------------------------------------------------->
7 07h <----------------------------------------preset 8--------------------------------------------------------->
8 08h <----------------------------------------preset 9--------------------------------------------------------->
Example: C0 00 recalls first preset (MIDI chan 1)
Channel only:
9 09h 1
10 0Ah 2
11 0Bh 3
The Factory Map is basically a long list of fixed presets with every combination of function. If automating a per-
formance from a MIDI rig, any combination of these functions can be found in this binary-style table.
NOTE: Due to MIDI limitations, the CC4 function is only controlled by the custom presets, not by the Factory
Map. It will be unchanged, not cleared.
Factory Map: CHANNEL
(decimal) (hex)
12 0Ch 1
13 0Dh 2
14 0Eh 3
15 0Fh 1
16 10h 2
17 11h 3
18 12h 1
19 13h 2
20 14h 3
21 15h 1
22 16h 2
23 17h 3
24 18h 1
25 19h 2
DRIVE BOOST MASTER BOOST
(preset saves for
...all three channels)
no change no change
no change no change
no change no change
blank = OFF; X = ON; n/a = not applicable
DRIVE BOOST MASTER BOOST GATE FX LOOP 1 FX LOOP 2
X
X
X
X
X
X
CC 4 GATE
(preset saves for
...channels 2 & 3)
no change no change
no change no change
no change no change
n/a
n/a
X n/a
X
X
X n/a
X
X
n/a
X
FX LOOP 1 FX LOOP 2
no change no change
no change no change
no change no change
13