Kohler K-9530 Guía De Instalación Y Cuidado página 6

Jog in Piping
Diverter
To Handshower
To Shower
Jog in Piping
Mixer Valve
Wall-Mount Deck-Mount
2. Piping Configurations
Verify the location of the components and the orientation of all
ports.
Decide in advance on the location and orientation of the diverter.
The locations of the shower and the handshower as well as the
direction in which the inlets/outlets point will affect the piping
and connectors needed.
Allow clearance for the valve outlets, handles, and handshower
hoses. For use with an optional spout, also allow clearance for the
spout connection.
You can extend the distance between the diverter and the braided
hose connection with 1/2" copper piping below the rim of the
bath/whirlpool, but it may not be safe or practical. A long run of
piping will mean a long run of room-temperature standing water
when the handshower is first activated for use.
Secure long runs of piping to the underside of the deck or rim. If
the piping cannot be secured at a point near the diverter, secure
the piping from underneath with lumber or other suitable
support.
1229813-2-A 6 Kohler Co.