Kohler K-9530 Guía De Instalación Y Cuidado página 9

Deck/Rim
Brass
Mounting
Nut
4. Install the Diverter
For Finished Deck Installations
At the diverter install location, drill a 1-1/2" (38 mm) hole.
For All Installations
NOTE: You may need assistance to align and secure the diverter.
Thread the mounting nut all the way down onto the diverter
body.
Slide the friction washer followed by the rubber washer over the
diverter body and down to the mounting nut.
Insert the diverter body through the deck/rim/wall.
Slide the washer onto the diverter body.
Thread the escutcheon onto the diverter body until the
escutcheon bottoms out on the diverter body. This will allow
ample clearance for proper handle function.
Align the inlets and outlets.
Hand tighten the mounting nut.
Kohler Co.
Escutcheon
Washer
Rubber
Washer
Friction
Washer
9 1229813-2-A