Setting Up The Nursery Unit - Angelcare AC117 El Manual Del Propietario

Sensor Pad
WARNING
STRANGULATION HAZARD
• The Sensor Pad is not designed for use with adults, children or infants older than 24 months.
• Discontinue used of the Sensor Pad when child is older than 24 months.
Remove Sensor Pad from crib and store for future use.
• BEFORE FIRST TIME USE: To test that the unit is ready for use, refer to instruction
manual on how to test that the installation has been done correctly.
STEP 3 - SETTING UP THE NURSERY UNIT
3.1 - SELECT A LOCATION FOR THE NURSERY UNIT
IMPORTANT
Place the crib near a supporting wall and far from air currents. Install the Nursery Unit on
a flat, stable surface facing the crib at a distance of at least 3 feet (1 meter). Make sure to
plug the adapter to the socket outlet nearest to the equipment and that is easily accessible.
1
1) Remove the mattress from
the crib.
2
2) Place the Sensor Pad -
Angelcare
center of the mattress. It should
be centered on the hardboard if
your crib requires a hardboard
support.
3) Replace the mattress.
1) Remove the batteries cover and
insert 2 AAA Alkaline Batteries
(not included)
Note:
The batteries maintain power
supply in case of power outage.
logo side up - in the
®
E
N
9