Technical Characteristics; Important - Vollrath Stoelting SCBA Serie Manual Del Usuario

EN GLIS H
S C B A & S C B F
1 SAFETY PRECAUTIONS
1 Before connecting the dispenser to the power source,
check that the voltage shown on the rating plate matches your
electricity supply. Connect the dispenser to a single-phase
supply through a grounded outlet as required by current
regulations.
2 Do not use extension cables to connect the dispenser.
3 To avoid any risks, if the power cable is damaged, it must
be replaced by the manufacturer, by an authorized technician
or by a similarly qualified person.
4 The dispenser is not suitable for outdoor use.
5 The dispenser must be installed in the upright position.
6 Before cleaning, always disconnect the dispenser by
removing the plug from the outlet.
7 Always disconnect the dispenser before removing any of
the panels for cleaning or maintenance work.
8 Do not use a water jet to clean the dispenser.
9 This dispenser must not be operated by children.
10 Do not let children play with the dispenser.
11 This dispenser must not be used by persons unless they
have been trained regarding the safe use of the dispenser and
understand the risks involved.
12 Only persons who know and have practical experience of
the dispenser are permitted access to the inner components of
the dispenser, especially when dealing with issues regarding
safety and hygiene.
13 For the dispenser to operate correctly, ambient temperature
must be between +41° and +89°F.
14 Use the dispenser to cool the indicated liquids only.
15 Do not introduce dangerous or toxic liquids to the
dispenser.

2 TECHNICAL CHARACTERISTICS

Transparent removable bowls
Capacity of each bowl, approx. gal
Dimensions:
width
depth
height
Net weight, approx.
Gross weight, approx.
Hermetic compressor
Air-cooled condenser
Overload protector
Noise level less than 70 dB (A)

IMPORTANT

Electrical characteristics: read the data on the plate of
each individual dispenser. This is located at the bottom
of the front panel, behind the drip tray on the right. The
serial numbers of the devices (preceded by the symbol #)
are shown on the frame below. Always refer to the data
shown on the plate.
We reserve the right to amend this manual without notice.
3 INTRODUCTION
Read this instruction booklet carefully in order to familiarize
yourself with all aspects of the dispenser.
Like all mechanical products, this machine requires cleaning
and maintenance. Good operation can also be affected by any
errors made by the operator during disassembly and cleaning.
For this reason, in the case of daily operations such as disas-
sembly, cleaning, sanitizing and reassembly, it is important that
the person using the dispenser is aware of the procedures and
can perform them without making errors.
The warranty for the SCBA and SCBF machines is as follows:
Five years on compressor; Three years on electrical board; Two
years on non-wear parts; One year labor
Every machine includes White Glove
Service. One call does it all – customer
service, technical service, parts or
warranty information, installation,
startup, sales, on-site service dispatch
and much more. Available 24 hours a
day, seven days a week year-round.
Contact White Glove Service at 800-
319-9549
2
1 2 3 1 2
1.5 1.5 1.5 2.5
2.5
in 7.8 15. 23. 7.8 15.6 23.6
6 6
in 18. 18. 18. 18.9 18.9 18.9
9 9 9
in 24 24 24 27.9 27.9 27.9
lb 55 90 125 55 99
25 44 60 27
lb 48
.
3
2.5
134
64