Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN GLIS H
S C B A & S C B F
CONTROL KEYBOARD
The keys have the following functions:
Pilot light A
On the right bowl: if it is on, it indicates that
the machine is in Standby mode; if it is off, it
indicates that the machine is working; if it
flashes, it indicates that the right bowl only is
off.
On the left bowl: if it is off, it indicates that
the bowl is working; if it flashes it indicates
that the bowl is off.
Standby
On the right bowl: if it is pressed for two sec-
key (B)
onds, it allows turning on and off the whole
machine; if it is pressed quickly while the
machine is working, it allows turning on and
off a single bowl (on machines with multiple
bowls only).
If it is pressed twice quickly: it allows turning
on and off the cover lights.
On the left bowl: if it is pressed quickly while
the machine is working, it allows turning on
and off a single bowl.
Product
If it is pressed quickly, it allows increasing
Preservation
density. If it is pressed one second while the
Key (C)
machine is running in the Granita making
mode, it allows switching to the Product
Preservation mode. If it is pressed one sec-
ond while the machine is running in the
Product Preservation mode, it allows switch-
ing to the Washing mode.
Granita
If it is pressed quickly, it allows decreasing
Making key (D)
density. If it is pressed one second while the
machine is running in the Product Preserva-
tion mode, it allows switching to the Granita
Making mode.
If it is pressed one second while the machine
is running in the Granita Making mode, it
allows resetting possible alarms.
The display shows the following icons:
Compressor icon
It shows the condition of the cooling sole-
(E)
noid valve.
Icon off: solenoid valve closed
Icon flashing: delay timer on
Icon on: solenoid valve open
Product Preserva-
If it is on, it shows that the machine is in
tion Icon (F)
the Product Preservation mode.
figure 1
Granita making
If it is on, it shows that the machine is in
Icon (G)
the Granita Making mode.
Density bar (H)
It shows the set density value and the
alarms.
HOW TO START THE DISPENSER
Turn the main power switch to position I. Pilot light (A) hopper
be on showing that the dispenser is ready to work.
Keep button (B) pressed until the dispenser starts.
Select the operation mode and the desired product density by
means of keys (C) or (D).
The smart display (optional) shows the following icons, too:
Compressor icon
It shows the condition of the cooling sole-
(E)
noid valve.
Icon off: solenoid valve closed
Icon flashing: delay timer on
Icon on: solenoid valve open
Product Preserva-
If it is on, it shows that the machine is in
tion Icon (F)
the Product Preservation mode.
Granita making
If it is on, it shows that the machine is in
Icon (G)
the Granita Making mode.
Density bar (H)
It shows the set density value and the
alarms.
Current time (L)
Displays the current time and/or product
temperature.
°C/°F scale icon
temperature scale set (°C or °F).
(M)
Timer icon (N)
when this symbol is lit, the timer is operat-
ing.
TIMER
DAY/NIGHT TIMER
This control board has a clock module which is used to auto-
matically switch from day mode to night mode and vice versa at
preset times.
NOTE: On machines with multiple bowls, the timer is only pres-
ent on the right control and its settings apply to all bowls.
When the machine is in Standby, the current time is displayed
with two flashing points separating the second and third digit to
indicate the seconds.
The current time and the mode switching times can only be set
when the machine is in Standby mode using the following keys:
Setting of current time and temperature scale (°C / °F)Key B +
Key C
Setting of mode switching time intervalsKey B + Key D
Timer ON/OFF Key D pressed for 5 seconds
SETTING OF CURRENT TIME
Press keys B and C simultaneously to enter the current time
setting mode. Press keys C and D to make the individual set-
tings and press key B to conform and move on to the next
selection. The following must be set in this order:
1 The number 24 or 12 are displayed and the second two
digits flash.
2 Setting of current time. The first two digits flash as well as
the third or fourth digit if the 12 hr mode is selected.
3 Setting of minutes. hopperThe second two digits flash.
SETTING OF MODE SWITCHING TIME INTERVALS
Press keys B and D simultaneously to enter the switching time
4
Publicidad
Tabla de contenido
