Preparing Booster Seat For Use; Unfolding/Folding Booster Seat - Harmony HMYFLDHBB-S3 Manual De Instrucciones

PREPARING BOOSTER SEAT FOR USE

INCORRECT USE OF THE VEHICLE'S 3-POINT
LAP-AND-SHOULDER SEAT BELT SYSTEM IS THE
MOST COMMON MISTAKE PEOPLE MAKE. IT IS
VERY IMPORTANT TO READ, UNDERSTAND AND
FOLLOW ALL INSTRUCTIONS AND WARNINGS.
DO NOT MISTAKE COMFORT FOR SAFETY. THE
VEHICLE'S 3-POINT LAP-AND-SHOULDER SEAT
BELT MUST BE SNUGLY ADJUSTED AT ALL TIMES.
! ENSURE the vehicle shoulder belt's position is correct
for your child's size. VERIFY OFTEN.
! WARNING: DO NOT use this booster seat if the
midpoint of your child's head is above the top of the
vehicle seat back/vehicle headrest.

UNFOLDING/FOLDING BOOSTER SEAT

1. Identify the locking strap
at the front of the booster
seat (see "Parts list"). Undo
locking strap by removing
elastic loop. Store strap
under fabric seat pad for
future use.
2. Remove folded headrest
(stored inside booster) and
set aside.
3. With the booster seat base flat on a surface, squeeze
the BACKREST LEVER and lift the backrest into
the vertical position ❶. Release the lever to lock
backrest into place.
WARNING!
!
❶
18