Carburetor; Throttle Cable Play - Haojue DM125 Manual De Uso

4. Do fine adjustment through the adjusting screw 3.
5. Firmly lock the nut 2 and 5, and then mount the
rubber bushes 1.
BCAUTION
Excessive clutch cable play can easily result in
wear and faults in the clutch and the gear shift
lever. If the clutch cable gap is not correct, or the
clutch is slipping or accelerating weakly, adjust the
cable on time.

CARBURETOR

Stable carbureting evaporation is the most fundamental
requirement for the carburetor.
evaporation has been accurately set in the factory. Please
do not change its setup. You only need to pay attention to
two things: idle and throttle cable free-play.
Adjustment of idle speed
1. Start the engine, keep it running
at idle till fully pre-heated.
2. After the engine has been pre-
heated, release the throttle, turn
the adjusting screw to right and
left to keep the engine revolving speed between 1300–
1500 rpm.
Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27
The carbureting
37
Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27
BCAUTION
Adjustment the engine idle speed should be done
when the engine has been fully pre-heated.

THROTTLE CABLE PLAY

1. Remove the rubber bush(s)
along the throttle cable.
2. Loosen lock nut 1.
3. Turn the adjuster 2 so that the throttle cable has 0.5–
1.0mm play.
4. Tighten the lock nut 1.
5. Reinstall the rubber bush(s).
BWARNING
Inadequate throttle cable play can cause engine
speed to rise suddenly when you turn the
handlebar. This can lead to loss of rider control.
Adjust the throttle cable play so that engine idle
speed does not rise due to handlebar movement.
(99)
0.5–1.0 mm
EN
(99)