Brakes - Haojue DM125 Manual De Uso

BWARNING
An excessively loose chain will result in the chain
coming off the sprocket, resulting in an accident
or seriously damage to the engine. Please adjust
the drive chain in accordance with the methods
described below.
1. Support the motorcycle with the main stand.
2. Loosen the rear axle nut 4.
3. Loosen the lock nut 2 on the adjusting bolt 1.
4. Turn the adjusting bolt 1 clockwise or anticlockwise
to make the chain slack for 10–20mm. Make the front
and rear chain wheels on a single straight line by
making sure of the left-right consistency of the sign
positions 3 of the rear wheel fork and the left and
right adjusters 5.
5. After adjusting the tightness of the transmission chain,
tighten the rear axle nut 4 and the lock nut 2 and
then reconfirm the tightness of the transmission chain.
Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27
10–20mm
Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27
BCAUTION
The drive chain of this motorcycle is made
of special materials carefully processed.
authentic parts (428H 120 links) when replacing
the drive chain.
specifications may cause early damage to the
chain.
NOTE: Each time when replacing the drive chain, please
check the abrasion conditions of both the front and
rear sprockets, replace sprockets at the same time if
necessary.
NOTE: When installing drive chain,
make sure the opening direction of
lock ring is the opposite direction of
the chain movement.
NOTE: After adjusting the drive chain, ensure that you
have checked the free stroke of the rear brake pedal.
Refer to "BRAKES" section in this manual.

BRAKES

In different configurations, the front wheel may be
provided with a disc or a drum brake while the rear wheel
provide with a drum brake. Correct brake operation is very
important for safe riding. Be sure to have the brake system
checked regularly. This inspection should be made by an
authorized dealer.
39
(101)
Use
Using parts with different
(101)
EN