(94)
Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27
Clean the filter as described below.
1. Fill a properly-sized basin with non-flammable
detergent (A) and immerse the filter into the detergent
solution.
2. Squeeze the detergent out of the cleaned filter with
both hands. Never twist the filter to avoid breaking it.
3. Immerse the filter in engine oil (B), squeeze out any
remaining oil, and leave the filter slightly oiled.
4. Reinstall the cleaned filter or new filter in reverse order
of removal. Be absolutely sure that the filter is securely
in position and is sealing properly.
BCAUTION
Never twist or wring the sponge filter while
cleaning.
Check carefully for fractures on the
filter. In case fractures are found, replace the filter
immediately.
EN
If any defect such as clog, damage or dust
infiltration occurs, replace it immediately instead of
waiting until scheduled maintenance.
(94)
Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27
BCAUTION
If riding in dusty conditions, make the inspection
and replacement intervals for the air filter element
shorter; if it is found that the air filter element
is blocked,
damaged or non-dustproof,
engine power has dramatically declined or the
fuel consumption has increased, do not solve
the problem during the next maintenance but
immediately change the air filter element. If the
engine is started when there is no air filter element,
it will wear more seriously. Check the condition
of the air filter element frequently because this
component usually has an impact on engine life.
BCAUTION
Before installing an air filter element that has been
cleaned, apply engine oil on it or else its filtering
efficiency will be lowered and the engine life will be
shorter.
OIL COLLECTING PIPES
After the air filter is inspected,
inspect the oil collection of the oil
collecting pipes at its rear lower part.
If there is liquid in the oil collecting
pipes, drain it promptly with the
method below.
1. Loosen the clamp 1.
32
the