Rear Absorber Spring Adjustment; Rear Brake Pedal - Haojue DM125 Manual De Uso

(78) Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27
This motorcycle has a 5-speed transmission which
operates as shown. After a speed is chosen, the shift
lever will automatically return to its original position for
next gear shifting.
Reduce speed before down-shifting. When down-shifting,
the engine revs should be increased before the clutch is
engaged. This will prevent unnecessary wear on the drive
train components and the rear tire.
BCAUTION
When the shift lever is in the neutral position, the
neutral position indicator will be lit. It would be
best to release the clutch lever slowly to check
whether the shift lever is already in the neutral
position.
BCAUTION
EN
Before shifting, grasp the clutch lever firmly and
close throttle grip completely.
NOTE: When the transmission is in neutral the green
indicator N on the dashboard will be lit. However, even
though the indicator is lit, cautiously and slowly release
the clutch lever to make sure that the transmission is truly
in neutral.
(78) Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27

REAR ABSORBER SPRING ADJUSTMENT

The rear absorber spring pre-load is adjustable to
compensate for rider, load, driving style and road
conditions. The spring pre-load is adjustable to five
positions. Twist the spring tension ring to the desired
position with the spring adjuster.
the softest spring tension and position 5 provides the
stiffest. This motorcycle is delivered from the factory with
its adjuster set on position 2.
BWARNING
The rear absorber springs on the left and right
sides must be placed in the same position.
Improper adjustment will affect ride stability.

REAR BRAKE PEDAL

Press on the rear brake pedal to
engage the rear wheel brake. The
brake light will also be engaged.
16
Position 1 provides