Maintenance And Cleaning - CASUALPLAY BiCare Fix Manual De Instrucciones

• Release the seat locking system, and position the Bi Care Fix seat facing forwards
(fig.03).
• To lock the seat to the base, press the seat locking button (red button). The Bi Care Fix
fastener indicator will turn green (fig.15).
• Place the child in the Bi Care Fix seat (fig.16), and fasten him in with the harness.
Consult the section on adjusting the harness to correctly secure the child in the Bi Care
Fix.
WARNING: Make sure that the seat is correctly fastened to the base.
Fitting/removing the upholstery
• Place the Bi Care Fix backrest in position 3, and take the seat off the base.
• Pass the plate that fastens the buckle to the seat, through the frame and the upholstery
(fig.17).
• Unfasten the Velcro on the backrest and take the upholstery off the seat.
• Next, undo the two zips on the headrest and take off the upholstery that covers it.
• To fit the upholstery back on again, follow the same steps in reverse.
WARNING: Make sure that the harness straps are not twisted, and that the
buckle is securely fastened to the frame.

Maintenance and cleaning

• Regularly inspect the restraint system to check that all the parts are in perfect condition.
• Clean the plastic parts with a damp cloth, and then dry them properly.
• If you want to wash the upholstery, it should be hand washed at a temperature of about
30ºC. Do not use fabric conditioner, do not tumble dry and do not iron.
21