System Requirements; Computer; Console; Cables - Tripp-Lite B020-008-17 El Manual Del Propietario

2. System Requirements

2.1 Computer

• A VGA, SVGA or Multisync computer with a HD15 port.
Note: On the B020-016, since the integrated LCD monitor's maximum resolution is 1024 × 768, the computer's resolution setting must not
exceed 1024 × 768. The B020-016-17 and B020-008-17 have a maximum resolution of 1280 x 1024, so the computer's resolution setting
must not exceed 1280 x 1024.
Either
1. a mini DIN 6 (PS/2) keyboard and mouse port
2. a 5-pin DIN (AT-style) keyboard port (requires a P106-000 adapter)
3. a USB Type A port

2.2 Console

• A VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any
system in the installation.
• A PS/2 style mouse
• A PS/2 style keyboard
*Optional external console ports are included on the NetDirector Console KVM Switches.

2.3 Cables

This KVM switch requires the following custom-wired premium cables:
Function
To Connect a PS/2 Computer to the KVM
To Connect a USB Computer to the KVM
USB Adapter (connects a USB system to the P774
series KVM cable)
Daisy-Chain Cables
Note: 1. NetDirector KVM Switches do not support serial mice. Using a Serial-to-PS/2 adapter will not work.
2. If your computer has an AT-style keyboard socket, use a PS/2-to-AT keyboard adapter
(Tripp Lite #P106-000) to plug into the computer's AT-style keyoard port.
Tripp Lite Part
P774- Series PS/2 KVM Cable Kit
P776- Series KVM Cable Kit
P772- Series Daisy-Chain Cables
4
B015-000