Panasonic ES‑RT51 Manual De Operación página 3

ThankyouforchoosingaPanasonicshaver.
WithourWET/DRYtechnology,youcanenjoyusingyour
Panasonicshaverdryorintheshowerorbathforgentle
andeasyshaving.
Pleasereadallinstructionsbeforeuse.
Important
Beforeuse

This WET/DRY shaver can be used for wet shaving with shaving
lather or for dry shaving. You can use this watertight shaver in
the shower and clean it in water. The following is the symbol of
Wet shaver. The symbol means that the hand‑held part may be
used in a bath or shower.
Treat yourself to wet lather shaves for at least three weeks and
notice the difference. Your Panasonic WET/DRY shaver requires
a little time to get used to because your skin and beard need
about a month to adjust to any new shaving method.
Usingtheshaver

Caution
Theouterfoilisverythinandcanbedamagedifnotused
correctly.Checkthatthefoilisnotdamagedbeforeusing
theshaver.Donotusetheshaverifthefoiletc.is
damagedasyouwillcutyourskin.
Chargingtheshaver

Do not use any power cord or AC adaptor other than one
specifically designed for this model. Use the RE7‑51 adaptor
only for ES‑RT51/ES‑RT31 shaver. Plug in the adaptor into a
household outlet where there is no moisture and handle it with
ES-RT51-31_LA.indb 3
dry hands. The shaver may become warm during use and
charging. However, this is not a malfunction. Do not charge the
shaver where it will be exposed to direct sunlight or other heat
sources. Hold the adaptor when disconnecting it from the
household outlet. If you tug on the power cord, you may damage
it. The supply cord cannot be replaced. If the cord is damaged,
the appliance should be scrapped.
Adequate ambient temperature for charging is 0‑35 °C (3‑95 °F).
For model ES‑RT51, if the plug symbol
when the shaver is plugged in, wait for a short while until it does.
For model ES‑RT31, if the plug symbol
when the shaver is plugged in, wait for a short while until it does.
The adaptor is intended to be correctly oriented in a vertical or
floor mount position.
Cleaningtheshaver

Warning
Disconnectthepowercordfromtheshaverbefore
cleaningitinwatertopreventelectricshock.
Keep both the inner blades inserted. If only one of the inner
blades is inserted, the shaver may be damaged. If you clean the
shaver with water, do not use salt water or hot water. Do not
soak the shaver in water for a long period of time. Wipe it with a
cloth dampened with soapy water. Do not use thinner, benzine
or alcohol.
Storingtheshaver

Disconnect the power cord when storing the shaver. Do not
bend the power cord or wrap it around the shaver. This
appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
Keep these operating instructions in a safe place.
does not glow initially
does not glow initially
3
2009/12/11 16:41:51