Faber ZOOMIL16SS400 Instrucciones De Instalacion De Los Estribos página 13

DRILLING THE CEILING TO FIX THE CEILING PLATE
2
Use a plumb-line and mark the centrer of the cooking surface on the Support Ceiling.
• Rest the ceiling plate against the ceiling, taking care to keep the limit pawl that has just been fitted in a
position facing the installer and the cooking surface (the limit pawl must not be confused with the other 4
used to fix the steel cables that move the Hood).
• Mark on the ceiling the centerlines of the holes in the ceiling plate.
• Drill the following points:
• Ceilings in solid concrete: As per concrete plugs used.
• Ceilings in hollow bricks with 13/16" resistance thickness: Drill a hole ø 3/8" (insert Plugs not supplied).
• Wooden shelf, with a resistant thickness of 9/16": drill a hole ø 1/4".
Insert two screws from opposite corners and leave 3/16" of the screws from the ceiling:
• for solid concrete, concrete plugs, not provided.
• for hollow bricks with approx. 13/16" resistance thickness, screws not provided.
• for wooden beams, wood screws, not provided.
• for wooden shelves, screws with washers and nuts, not provided.
3
4X
13