Faber ZOOMIL16SS400 Instrucciones De Instalacion De Los Estribos página 16

CONNECTING HOOD-PLATE CABLES
N.B. Before continuing with installation it is
necessary to move the hood to a height of at least
24" from the electric cooking surface and 30" from
the gas cooking surface, using a support or the
assistance of another person.
This is essential, as the hood cables must
necessarily be connected to the plate fitted
to the ceiling without the weight of the hood
bearing on the structure.
The cable fixing system is made up of 3 parts:
• Threaded Pawls (a) already mounted on the ceil-
ing plate.
• Cable clamp screws (b) provided (15).
• Safety knobs (c) provided (15).
• Pass the cables connected to the hood canopy
into the respective holes in the plate cover, after
dismantling (11).
• Insert the cable raceway (14) in the opening on
the plate cover and pass the hood power supply
cable through it.
• Leave Power Supply Cable loose above the plate
cover and see power supply connection later in the
guide.
Warning: Do not break or remove the clamp fix-
ing the power cable to the Hood.
• Attention to the direction of the ceiling plate fixed
to the ceiling (the limit pawl on the plate fastened
to the ceiling has a corresponding hole on the plate
cover and on the hood canopy).
11
16
9
A
B
15
C
10
14