Yearly Dealer Maintenance - Holmatro RA 5311 CL Manual De Instrucciones

EN
8.5.4 Hydraulic hoses
WARNING
Check that the hose bend restrictors are in place and in good condition.
• Check the hose for damage and leaks. Replace the hose if it leaks, has kinks, the reinforced cover
is visible or it has blisters or bulges higher than 1 mm. In case of doubt always contact the Holmatro
dealer who can assess the seriousness of the damage.
• Replace the hose no later than 10 years after the date of manufacture, regardless of its use and
external appearance. The date of manufacture is part of the test code, the first 4 digits of the test
code specify the date of manufacture of the hose (yymm*****).
8.5.5 Grip heads
Check the grip heads for damage. Replace damaged grip heads.
8.5.6 Accessories
• Check the accessories for damage, dirt and completeness. Replace damaged accessories and
make sure that the accessories are complete.
• Remove dirt with clean running water. Dry the accessories. Apply a thin coat of preservative oil to
the external steel parts.
8.5.7 Connection system for accessories
• Check the connection system on the fixed side and on the plunger side for damage and operation. If
the connection system does not work properly and/or leaks, have it repaired by an Holmatro
Certified Technician.
8.5.8 Deadman's handle
• Check whether the deadman's handle returns to the neutral position.
• Check the operation of the deadman's handle. Have the Holmatro dealer repair the deadman's
handle if it does not function properly.
8.5.9 Plunger(s)
• Check the plunger(s) for damage. If a plunger is damaged, have it repaired by an Holmatro Certified
Technician.
8.5.10 Carrying handle
• Check the carrying handle for damage. Replace a damaged carrying handle.
• Check the attachment of the carrying handle. If necessary, fasten it firmly .
8.5.11 Light
• Check the light.
• Replace the battery if it gives little or no light.
• Have a Holmatro Certified Technician repair the light if a new battery does not solve the problem.
8.6

Yearly dealer maintenance

We recommend having the equipment inspected, checked, set and tested once a year by a Holmatro
Certified Technician who has the appropriate knowledge and the necessary tools (see also section 1.7).
The Holmatro dealer can organize the yearly maintenance for you on a contract basis.
50 916.400.010_005 RA/TR 53**