General Information; Customer Information - Gallignani GA FB 12 Manual Del Operador

INTRODUCTION
This Operator's Manual contains all the practical in-
formation required for the operation, adjustment and
maintenance of your new machine.
Your machine is a "harvesting baler" designed to be
towed and operated by an agricultural tractor and
destined to harvest wet or dry crops and package
them in cylindrical bales.
This machine has been designed and manufactured
to grant top performance, comfort and operating
easiness in a wide range of crops and conditions.
Your "harvesting baler", below called baler, has been
thoroughly checked prior to the delivery both in the
factory and by your Dealer, to make sure it is in per-
fect conditions.
To keep the baler in these conditions and ensure a
trouble--free operation, the periodic maintenance
operations listed in this manual should be carried out
at the recommended intervals.
Before operating or driving your machine, read
this manual carefully, paying special attention to
the chapter on safety rules, and always keep it at
hand for further reference.
The terms "left" and "right" are always used with ref-
erence to the machine forward direction.
Should you require further information about the ma-
chine, do not hesitate to contact your authorized
Dealer. Your Dealer can provide specially trained
staff, quality genuine spare parts and the required
tools to solve any problems that might arise.
SECTION 1

GENERAL INFORMATION

CUSTOMER INFORMATION

NOTES:
this machine has been planned and designed in
D
compliance with the 98/37/EC European Directive.
A CE Conformity Certificate is supplied with the
machine.
Do not make any modification without the written
consent of the manufacturer, otherwise the latter
rejects any further responsibility.
As this manual is distributed through our interna-
D
tional network, the standard and optional equip-
ment may differ from those illustrated according
to the legal requirements in force in your country
or region.
Specifications may differ from those described in
this manual according to customer's require-
ments.
Many of the illustrations in this manual show the
D
machine with standard guards, or the guards --
required by law in different countries -- open or re-
moved for better illustrating a special feature or
adjustment.The machine cannot be used in
these conditions. For your safety, always
make sure all the safety guards are closed
and fitted correctly before starting the ma-
chine.
This manual must be kept with the universal
joint one, in a safe place, for its preservation
and for reference, all the machine life long.
MODIFICATIONS AND IMPROVEMENTS
Our company is constantly perfecting its products
and reserves the right to modify and improve its prod-
ucts whenever and however it deems it necessary,
without any obligation to apply such modifications to
previously sold machines.
E
N
G
L
I
S
H
1- -1