Selecting The Characteristic Type - Würth ACCTIVA EXPERT Manual De Instrucciones

Selecting the
1.
characteristic type
2.
3.
Press Stop/Start button to select the characteristic type according to the enclosed
characteristic data sheet
If there is no further selection within 10 seconds, the selected characteristic type is
saved.
Important! Do not connect a battery during these 10 seconds. The characteristic
type will not be saved if a battery is connected within these 10 s.
Continue as described in the section „Charging the battery".
Both Ready indicators light up. Once the new characteristic type has been selected,
the charger is automatically ready for the next charging sequence:
24 V
12 V
11