Charging; Finishing Charging - Würth ACCTIVA EXPERT Manual De Instrucciones

Charging

Important! The charging voltage displayed must be the same as the battery voltage. If
necessary, correct the charging voltage using the Start/Stop button.
1.
2.
Finishing char-
ging
3.
4.
5.
12 V
A set of four LEDs show the battery's charge level
25 %
Conservation charging: Once the battery is fully charged, the charger automatically
switches to conservation charging to prevent battery self-discharge. The battery can
remain connected to the charger for any length of time.
CAUTION! Risk of sparks if the charging terminals are disconnected too
soon. Press Stop/Sart button to finish charging
Press Stop/Start button to complete charging
Disconnect charging cable (black) from negative pole (-) on battery
Disconnect charging cable (red) from positive pole (+) on battery
24 V
50 %
8
75 % 100 %