Equipment And Accessories - TECNOPLUS Sistem-air Domestic TECNO R-evolution Serie Manual Tecnico

8 - EQUIPMENT AND ACCESSORIES

Together with the unit, delivered with this instruction manual, a BI-VAC confi guration kit is supplied in
the packaging; the kit allows the operator to choose between the dust being collected directly in the dust
bin or in the special microfi ber bag. The production confi guration of the Tecno R-EVOLUTION system
features a hole to be completed with the BI-VAC kit when installing the unit. This equipment offers the
following two options:
- confi guration 1 cyclonic suction with service suction socket: cyclonic vacuum cleaning for dust
collection with possibility of using the service suction socket assembled on the machine body; dust is
collected directly into the dust bin;
- confi guration 2 bag suction: suction cleaning with a microfi ber high-fi ltering dust bag with no need
to clean the fi lter.
The kit includes the following components:
Components to be found in the kit
Service suction socket with fl ap closure
Elbow coupling to be fi xed in the hole
(bag suction dust inlet)
Closing cover for dust suction inlet (to
be assembled on the cyclonic suction
dust inlet)
Retaining-ring seal to hold the dust
bag, which replaces the conveyor cone
Microfi ber dust bag
N°4 fi xing screws
N°4 washers
N°2 gaskets
N°1 aesthetic frame for elbow
connector
21/01/16 Rev:3.0.0
To be used for the
confi guration
1
2
2
2
2
1+2
1+2
1+2
1
2
Picture
17