Description Of The Unit - ProMed UV-LED 60 Instrucciones De Empleo

Dispositivo de fotopolimerización led uv
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
D
ESCRIPTION OF THE UNIT
Please read the user manual thoroughly before using the appliance for the first time.
Thank you for purchasing the Promed UVLED-60 UV lamp. This lamp has been designed
and manufactured in accordance with the 87/308/EEC Directive for Electrical Appliances
and its amendments to guarantee quality of treatment. Both qualified specialists and private
persons may use the lamp after they have read the user manual. This lamp is only suited for
use in nail techniques and nail design as well as the handling of all materials used in these
areas, such as gel and acrylics. We, as the manufacturer, cannot be made liable in any way
for injury or damages to people or objects that arise from failure to comply with this warning.
We wish you a lot of enjoyment with your new Promed UVLED-60 UV lamp. We would like
to familiarize you with the appliance in the following sections. Please read the user manual
thoroughly before using the lamp for the first time.
I
NFORMATION ON THE UNIT
Before operating the unit for the first time, please check that all contents have been delivered and
that the line voltage is correct. The supplied power adapter (A) is an electronic power supply
unit intended for an operating voltage of 100 V~ to 240 V~.
• The Promed UVLED-60 device is only intended for curing materials like gel and acrylic
which are used in the field of nail technology and nail design and are suitable for LED
light-curing devices.
• The Promed UVLED-60 UV lamp has a timer programmed with 4 fixed operating times
(30 sec / 60 sec / 90 sec / 30 min). The user can select the time required depending on
the area of application.
• In order to guarantee hygienic treatment, it is recommended that the hand rest be disinfected
after use.
• Information about suitable disinfectants and products can be obtained from Promed.
For disinfection of surfaces and devices:
Promed Pure FD (Product No. 330815)
• If needed, the power adapter (Product No. 290426) can be purchased from Promed
separately.
Please keep this user manual in a safe place!
/
ACCESSORIES
DE
EN
FR
IT
ES
NL
RU
PL
SE
FI

Publicidad

Tabla de contenido
loading

Tabla de contenido