Legal Notice; Customer Service; Technical Data; Troubleshooting - Boneco U650 Instrucciones Para El Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Storing the appliance for extended periods
Clean the appliance as described earlier and allow to dry
thoroughly. Preferably store the appliance in its original box,
in a dry place away from high temperatures.

Legal notice

The humidifier is cUL-listed.
Subject to technical change. The instructions for use are
protected by copyright © BONECO AG.
Accessories
Contact your local retailer or check our website
www.boneco.us for reorder information.

Customer Service

Customer Service (USA) 1-800-336-0326
www.boneco.us

Troubleshooting

Problem
Possible cause
Unit does not operate
Power cable not plugged in
No water in the tank (Empty indicator on)
No mist output
Unit needs cleaning
A250 AQUA PRO exhausted
Weak mist output
Water temperature too low
Mineral deposits on membrane
Unit running intermittently
A250 AQUA PRO exhausted
White dust around the humidifier

Technical data

Electrical voltage
Power consumption up to
Humidity output up to
Suitable for rooms up to
Dimensions (LxWxH)
Weight (empty)
Accessories
* when used with pre-heating to 176 °F (80 °C)
What to do
Plug in power cable
Fill tank with water and wait 10 min.
Descale the water base using EZCal and EZCal PRO
Replace A250 AQUA PRO
Set mist output to maximum, after 15 min.
the humidifier will work properly again
Clean membrane using EZCal and EZCal PRO and brush
Replace A250 AQUA PRO
120 V / 60 Hz
40 W / (125 W*)
3.5 gallons / 24 h*
650 sq ft / 60 m
2
11 x 9.5 x 14 in
28 x 24 x 35.5 cm
8.8 lbs / 4 kg
A250 AQUA PRO
Hydro Cell A200
EZCal A7417
EZCal PRO A100
en
15

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido