Cleaning & Maintenance - Boneco U650 Instrucciones Para El Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Cleaning/Maintenance
Always unplug the unit before removing the
water tank. Do not touch the water in the base
during operation!
Caution – risk of electric shock and
damage of the product!
• Switch off the appliance (19) and unplug it from the
socket before cleaning it (20).
• Clean the water tank and the base regularly. Use water
only, no detergents (21).
• Use EZCal and EZCal PRO custom cleaning and descal-
ing agents only to remove deposits from the membrane
regularly (22). There is a sample of EZCal included in
the packaging of your humidifier. Instructions for using
are on the packet. Only use 1 packet for 32 oz of water.
Do not change the ratio. Do NOT run the unit when
using EZCal and EZCal PRO. This can cause damage to
the product and voids the warranty.
Thoroughly rinse the base with tap water after using
EZCal and EZCal PRO and make sure no EZCal and
EZCal PRO residues remains in the base.
EZCal and EZCal PRO the only recommended
cleaning and descaling solutions. Do NOT use
any other cleaning solutions since it can damage
the product. Any use of cleaning solutions apart
from EZCal and EZCal PRO will void the warranty.
• Make sure main body is never submerged in water
(23)!
• The cleaning indicator still appears on the display after
cleaning. To reset it hold down the ON/OFF button until
the clean light disappears.
• Clean the inner parts with a soft cloth. Do not use any
solvents or aggressive cleaning agents to clean the ap-
pliance (24).
19
20
21
22
WARM
23
24
en
WARM
13

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido