Honeywell Miller SkyORB Manual De Instrucciones Para El Usuario página 22

Us e r I nst r uct i o n s - E ng l i sh
Fig. 15a
Reposition and install ramps.
-
aging from ramp wings. Then remove the
four corresponding ramp bolt assemblies.
Set the ramp wings in place, orienting
wings to create a ramp on each side and a
tire well in the center.
Fig. 15b
Reinstall the four (4) bolts (with lock wash-
Then tighten each bolt assembly until
lockwashers are fully compressed.
Torque bolts to 100 ft.-lbs.
22