Purpose; General Requirements, Warnings And Limitations; General Fall Protection Requirements - Honeywell Miller SkyORB Manual De Instrucciones Para El Usuario

Thank You
Thank you for your purchase of Miller fall protection equipment manufactured by Honeywell Safety Products. Miller brand products are
cared for properly.
All persons using this equipment must read, understand and follow all instructions. Failure to do so
may result in serious injury or death. Do not use this equipment unless you are properly trained.
Questions?
It is crucial that the authorized person/user of this equipment read and understand these instructions. In addition, federal law requires
employers to ensure that all users are trained in the proper installation, use, inspection, and maintenance of fall protection equipment. Fall
protection training should be an integral part of a comprehensive safety program.
Proper use of fall arrest systems can save lives and reduce the potential of serious injuries from a fall. The user must be aware that forces
experienced during the arrest of a fall or prolonged suspension may cause bodily injury. Consult a physician if there is any question about
the user's ability to use this product. Pregnant women and minor children must not use this product.
1.0 Pur pose
The Miller SkyORB Anchor is a specially-engineered overhead rotational boom anchorage system, which provides a safe, mobile, easily
accessible and viable fall arrest anchorage point for workers in applications, such as truck loading /unloading and maintenance, where over-
head structures are not available for tie-off.
2.0 General Requirements, War nings and Limitations

2.1 General Fall Protection Requirements

All warnings and instructions shall be provided to authorized persons/
users. Warnings and instructions must be read and understood prior
to using this equipment.
All authorized persons/users must reference the regulations
governing occupational safety, as well as applicable standards.
Proper precautions should always be taken to remove any
obstructions, debris, material, or other recognized hazards from the
work area that could cause injuries or interfere with the operation of
the system.
All equipment must be inspected before each use according to the
manufacturer's instructions.
basis.
To minimize the potential for accidental disengagement, a competent
person must ensure system compatibility.
Us e r I nst r uct i o n s - E ng l i sh
!
CALL
1.800.873.5242
WARNING
Equipment must not be altered in any way. Repairs must be
performed only by the equipment manufacturer, or persons or entities
authorized, in writing, by the manufacturer.
Any product exhibiting deformities, unusual wear, or deterioration
must be immediately discarded.
Any equipment subject to a fall must be removed from service.
The user shall have a rescue plan and the means at hand to
implement it when using this equipment.
Never use fall protection equipment for purposes other than those
for which it was designed. Fall protection equipment should never
be used for towing or hoisting.
Never remove product labels, which include important warnings and
information for the authorized person/user.
3