Connection Manager; View And End Active Connections - Nokia E75 Manual Del Usuario

Filter WLAN networks
•
found networks. The selected networks are filtered out the
next time the application searches for WLANs.
Start web browsing
•
access point of the WLAN.
Cont. web browsing
•
the currently active WLAN connection.
Disconnect WLAN — Disconnect the active connection to
•
the WLAN.
Details — View the details of the WLAN.
•
Important: Always enable one of the available
encryption methods to increase the security of your wireless
LAN connection. Using encryption reduces the risk of
unauthorized access to your data.
Use the WLAN wizard in the home screen
In the home screen, the WLAN wizard shows the status of
your WLAN connections and network searches. If the WLAN
wizard is not activated by default in the home screen, you can
activate it in the home screen settings. To view the available
options, select the row showing the status. Depending on the
status, you can start the web browser using a WLAN
connection, connect to your net call service, disconnect from
a WLAN, search for WLANs, or enable or disable network
scanning.
If WLAN scanning is disabled, and you are not connected to
any WLAN, WLAN scanning off
screen. To enable WLAN scanning, and to search for available
WLANs, select the row showing the status.
© 2009 Nokia. All rights reserved.
— Filter out WLANs in the list of
— Start browsing the web using the
— Continue web browsing using
is displayed in the home
To start a search for available WLANs, select the row showing
the status and Search for
To disable WLAN scanning, select the row showing the status
and Switch WLAN scan
When Start web browsing
wizard automatically creates an access point for the selected
WLAN. The access point can also be used with other
applications requiring WLAN connection.
If you select a secured WLAN, you are asked to enter the
relevant passcodes. To connect to a hidden network, you
must enter the correct service set identifier (SSID).
To use the found WLAN for a net call connection, select the
row showing the status,
and the WLAN to be used.

Connection manager

Select Menu Control panel
>
mgr..
View and end active
connections
To see the open data connections, select
connections.
To view detailed information about network connections,
select a connection from the list and
type of information shown depends on the connection type.
WLAN.
off.
or Use for is selected, the WLAN
Use for, the desired net call service,
Connectivity
>
Active data
Options > Details. The
Conn.
>
127