Memory Use - Microlife PF100 Manual De Instrucciones

8.

Memory Use

The 240 readings can be
reviewed on the display:
1. Switch the monitor on and press
the memory scroll buttons.
2. By pressing the «<» button, you
can see the latest value stored in
the memory with date and time.
If you keep pressing the button
you can move quickly through the
memory.
3. The «>» button works in the
opposite direction.
• Memory Capacity Low
When the memory covers 230 or
more data, «MR XX» is blinks
after the monitor is switched on
to indicate that the remaining
memory capacity is low.
• Memory Full
When the memory is full with
240 readings, the monitor gives a
warning «beep» when switching
21
AM