Microlife PF100 Manual De Instrucciones página 25

2. Connect one end of the printer
cable into the jack next to the
printer symbol and the other end
with the printer next to «Input». it
does not matter which end of the
cable you insert into which device.
3. Insert paper into the printer by
following the instructions
supplied with the printer.
4. Switch the printer on by moving
the start button to the left.
5. Press the ON/OFF button to turn
the Asthma monitor on.
6. Print Last Measurement
Press the small switch next to the printer symbol on the
data compartment. <<Pr1>> is displayed and the printer
starts printing the last result.
• Print All Readings in the Memory
Please follow the above instructions but
press on the small switch next to the
printer symbol for about 3 seconds.
«Pr 1» is displayed and the printer starts
printing all data.
23