Microlife PF100 Manual De Instrucciones página 24

on and «MR 240» blinks. From
now on, data is still memorized
but the oldest values are
automatically erased!
• Memory Clear
To clear all data press the «<» and the «>»
buttons simultaneously for 5 seconds, and
then release the buttons. «clr» starts blinking
in the display for about 3 seconds. If you
really want to erase all data from memory
you need to press the ON/OFF button during
these seconds. Otherwise the monitor moves
back to normal operation and the data
remains.
9. Print Data with the Microlife Thermal Printer
(Printer sold separately, Visit www.microlifeusa.com or call
800-568-4147 to purchase.)
The monitor can be connected
with the Microlife thermal printer
(available as an accessory) to
print data from the memory .
1. Open the Data Compartment from
the underneath.
22