Returning To The Factory Setting; Shedding; Maintenance - Atlantic NIRVANA DIGITAL Instruccion De Uso

To de-activate the access code,
go back to advanced settings and
hold and pressed together
MENU
for a few seconds.
Enter your code. Wait 5 seconds.
Press until «CP» and your code
are displayed.
Your device gives you the possibility of returning to the basic setting (recommended temperature, initial
programming).
Hold and
MENU
simultaneously for a few seconds,
then press 3 times on
activate the function, select OUI
with the setting buttons
(D).
All the settings appear on the
screen.
Our devices are compatible with the various shedding systems. However you cannot use shedding by cutting
off the network supply since this system is incompatible with our devices. It damages the thermostat.
During shedding periods, your radiator displays "Off". It then comes back to its initial operating mode.
To retain the performance of the device, it is necessary about twice a year to carry out dust removal using a
vacuum cleaner or a brush at the air inlets and outlets. Every five years, have the inside of the device checked
by a professional electrician. The outside of the device can be cleaned with a damp cloth.
Never use abrasive products or solvents
38
ECO
CP
---

RETURNING TO THE FACTORY SETTING

pressed
(C). To
or

SHEDDING

MAINTENANCE

Hold or pressed until «no» is
displayed (between 000 and 999).
Wait 5 seconds.
To exit this function, hold
and pressed together for a few
seconds. Access to the advanced
settings is no longer coded.
"FS" "OFF" is displayed on the
screen.
Press on or (D), select "on".
After 5 seconds of non-activity,
your setting is automatically
validated.
After 1 minute of non-activity
or by pressing simultaneously
on and , the device is
MENU
put onto the Comfort mode
at 19°C. The ECO mode is at
15.5°C. The energy economy
functions and the programming
are de-activated.
MENU