Chain Lubrication - Sandri Garden SG 925/30 CS Manual De Instrucciones

PETROL CHAIN SAW FOR TREE SERVICE USER MANUAL
2) Mix by shaking the fuel
container extensively before
each refuelling.
Prepare a quantity of fuel that can be used
within 1 month.
3) Prepare the fuel mixture and perform the refuel-
ling only in the open air (Fig.28).
4) Store the fuel in a container made for the pur-
pose and with the cap properly closed.

6. CHAIN LUBRICATION

1) WARNING! Only use oil specifically designed
for chain saw lubrication (see fig.29).
2) DO NOT use old oil.
3) Using a non recommended oil can damage
the guide bar, the chain and the lubrication sys-
tem.
Top up the chain oil tank every time you
add fuel.
Fig.28
Fig.29
7. STARTING AND STOPPING OP-
ERATION
WARNING! Strictly follow the safety
rules specified in the previous
chapter 2 MAIN SAFETY PRECAUTIONS.
DANGER! Start the chain saw only
when all its parts are in place, in-
cluding the guide bar and chain.
STARTING THE CHAIN SAW
STARTING A COLD ENGINE
Before starting the engine, apply the chain
brake by pushing the chain safety lever all
the way forward (fig.30)
33