Changing The Image Gamma/Aspect Ratio (Video Menu Mode Only) - JVC D-ILA DLA-G150CLE Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Menu Operations

Changing the Image Gamma/Aspect Ratio (Video Menu Mode Only)

The image Gamma (Down, Cinema or Up) and the aspect ratio (4:3 or 16:9) are selectable in Video menu mode.
1
Press the MENU button.
The main menu appears on the screen.
2
Select "Set up" with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ , and press 3 3 3 3 or the ENTER button.
The "Set up 1" submenu appears on the screen.
Video submenu
Set up 1
Position
Gamma
Down
Aspect ratio
Decoder
Page 2
Decoder is only displayed when there is a signal for the Video IN terminal.
3
Select "Gamma" or "Aspect ratio" with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ .
4
Adjust the image tone or aspect ratio with the cursor 2 2 2 2 or 3 3 3 3 .
*To adjust multiple items, repeat 3 and 4.
Adjustment item
Gamma
Aspect ratio
* : Factory set value
5
Press the EXIT button to return to the previous menu or press the MENU button to
exit the menu mode.
52
ENTER
Cinema
Up
4:3
16:9
ENTER
ENTER
Button
The image Gamma projected on the screen can be changed.
Down
: Suitable for projecting the video programs.
2 or 3
Cinema* : Normally use in this mode.
Up
: Suitable for projecting the cinema programs.
Sets the vertical-to-horizontal ratio (4:3 or 16:9) of the video image projected.
"4:3*" : The aspect ratio of the projected image becomes 4:3. Set it to 4:3 for video
2 or 3
of NTSC, NTSC4.43, PAL, SECAM.
"16:9" : The aspect ratio of projected image becomes 16:9. Set it to 16:9 for Hi-
Vision devices (W-VHS VCR, etc.).
Adjustment content

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido