Festo DFME LAS Serie Instrucciones De Utilizacion página 44

DFME−...−LAS
DFME−...−LAS
1)
Nominal stroke
Resistance to shifting at
speed 0 m/s
Electrical specifications
CE symbol
(see conformity declaration)
Vibration tested according to
DIN/IEC 68/EN 60068 part 2−6
Shock tested according to
DIN/IEC 68/EN 60068 part 2−27
Protection class (mechanical)
Protection class (el. connection)
Max. permitted motor temp.
Ambient temperature
Storage temperature
Materials
Housing, cover, yoke plate,
cooling tube, measuring rod
Guide rod
Plain bearing, sensor housing,
cover cap
1)
Theoretical total stroke = rated stroke + stroke reserves
2)
At 23 °C ambient temperature
3)
Observe temperature influence
4)
Peaks and permanent forces without consideration of friction è chapter 13 Characteristic curves"
44
32
[mm] 100 200
[N] 10
To be used only in conjunction with controller SFC−LACI
In accordance with EU EMC Directive
0.15 mm path at 10 ... 58 Hz
2 g acceleration at 58 ... 150 Hz
±15 g at 11 ms duration
5 shocks per direction
IP40
IP65 (for DFME−LAS−S1)
[°C] +70 (Warning at 70 °C; switch−off at 75 °C)
[°C] 0 ... +40 (loading capacity of the guided drive dependent on
ambient temperature)
[°C] 20 ... +60
Anodised aluminium
Tempered steel, hardened
Polyacetate
40
320 100 200
20
Festo DFME−...−LAS 0904NH English
320 400