Installation; Mechanical Installation - Festo DFME LAS Serie Instrucciones De Utilizacion

DFME−...−LAS
5

Installation

Mechanical installation

Fitting in a vertical or sloping position:
Warning
Uncontrolled moving masses can cause injury to people (danger of crushing)
or damage to property.
· Check whether additional external safety measures are required to prevent
the work load from sliding down.
The DFME−LAS has no automatic locking.
With all applications:
Note
The possible dynamics and accuracy of the DFME−LAS may be reduced
depending on the fitting (stiffness and temperature stress).
· Make sure that the device is fitted free of mechanical stress and distortion
(evenness of mounting surface 0.05 % of the stroke length).
· Avoid an accumulation of heat. A high packing density or narrow fitting
situations favour an accumulation of heat.
· Ensure a high rigidity in the mechanical design (incl. base).
30
Festo DFME−...−LAS 0904NH English