Installing Circuitry - Festo DFME LAS Serie Instrucciones De Utilizacion

DFME−...−LAS
Measuring system, measuring tape division, interpolation
The distance between two index lines (= north or south pole of the magnetic
displacement encoder) is 2 mm. That equals 2048d (800h) increments. The
increments are calculated by means of interpolation.
This results in the following conversions (all figures are decimal):
[Inc] è [mm]
[mm] è [Inc]

Installing circuitry

Note
If used in safety−relevant applications, additional measures are necessary.
In Europe, for example, the standards in the EC machinery directive must be
observed.
Without additional measures in accordance with statutory minimum
requirements, the product is not suitable for use in safety−related sections
of control systems.
36
x Inc
mm +
2 mm
2048 Inc
Inc + x mm
2048 Inc
2 mm
Festo DFME−...−LAS 0904NH English