Non-Photometric Detectors; Set The Power To On - Hach QuikChem 2 Serie Manual Del Usaurio

Figure 13 Multi-channel plumbing
1 Waste container
2 Injection valve waste tubing
3 Sample tubing in

Non-photometric detectors

Other types of detectors are necessary for some methods, such as fluoride, flame photometers,
conductivity or pH. The regular flow cell or interference filters are not necessary for non-photometric
detectors, such as an ISE detector for fluoride determination. Refer to the instructions in the
QuikChem method for fluidic connections.

Set the power to on

1. Set the power to on for each instrument. Refer to
2. Set the power to on for the power strip.
4 System unit
5 Manifolds
6 Channel 1
Figure
7 Channel 2
8 Channel 3
9 Flow cell waste tubing
14.
English 19