Control Unit; Symbols Used; General Safety Precautions - Aprimatic PTR-24 Instrucciones Para La Instalación Electrica, El Uso Y El Mantenimiento

SYMBOLS USED

The symbols used in this manual have the following meaning:
!
Warning
This symbol precedes important warnings for the SAFETY of persons and the environment.
Caution
This symbol precedes important warnings
Information
This symbol precedes useful

GENERAL SAFETY PRECAUTIONS

Carefully read the instructions before starting to install the product.
!
Warning
Packing materials (plastic, polystyrene, etc.) must not be dispersed in the environment and must not be left where children
can fi nd them as they are a potential source of danger.
Do not use the product for non-specifi ed or improper purposes.
Do NOT tamper with or modify the product in any way.
INCORRECT INSTALLATION OF THE PRODUCT MAY CAUSE SERIOUS HAZARDS. FOLLOW ALL THE INSTALLATION
INSTRUCTIONS CAREFULLY.
Only professionally qualifi ed personnel should install the product.
We recommend operating in a well-lit and healthy environment, in compliance with the safety regulations in force. We
recommend the use of approved protective clothing (safety shoes, protective goggles, gloves and helmet). Do not wear
articles of clothing that could get caught.
Take adequate safety measures to prevent the risk of injury caused by sharp splinters and the possible risks of crushing,
knocks and cuts or amputation.
Delimit the yard to prevent any unauthorised persons from transiting in the working area. Do not leave the working area
unattended.
We recommend strict observation of the national regulations for safety in work sites (in Italy, Legislative Decree 528/99
combined with Legislative Decree 494/96 "Implementation of Directive 92/57/EC concerning the minimum rules and
regulations on health and safety at work to be observed when working on temporary or mobile sites").
Installation, electrical connections and adjustments must be carried out in a professional manner in compliance with the
Good Manufacturing and Workmanship regulations in force in the country where the automation is installed.
The manufacturer of the device is not responsible for the non-observance of professional standards of work in the
construction of the power-driven structure, nor for any damage which may be caused by the use of the drive.
Incorrect installation may be dangerous.
Follow the manufacturer's instructions.
Before starting installation, check that the product is intact and that the existing structure is suitably strong and stabile.
Information
Only suitably skilled technicians trained on the product are authorised to connect up, test and put into service this product. We
strongly recommend following a specialised training course. Installers should contact the supplier for information on courses.
At the end of the work the installer must check the installation is done correctly and the automation works properly.
Before you test or put into service this product you must check that it conforms to the relevant sections of the MACHINERY
DIRECTIVE 98/37/EC. The installer must be in possession of the TECHNICAL DOSSIER for the product and be able to
produce the dossier whenever requested.
The installer should assess the risks connected with the product and check that there are no crushing or shearing hazards
present. If necessary special preventive measures must be taken and all of the signs required by the regulations in force
to warn of any dangerous zones must be attached.
Every installation must clearly indicate the ID data for the power-driven system.
The installer must provide full information about the automatic, manual and emergency functioning of the equipment and
deliver the operating instructions to the system user.
Only use original spare parts for any repairs or for replacing parts. The guarantee is void if this product is used in combination
with others of other brands.
The manufacturer of the drive declines any responsibility if components incompatible with safety and correct operation are installed.
!
Warning
In the event of any faults disconnect the operator from the mains power supply using the main switch. Do not try to repair
the main unit. Contact the installer or other specialist assistance centre. Failure to follow these instructions may result in
hazardous situations.
PTR-24
for the safety of the PRODUCT and any connected property.
INFORMATION.
- 19 -

CONTROL UNIT