Operating Logic (Tables) - Aprimatic PTR-24 Instrucciones Para La Instalación Electrica, El Uso Y El Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

CONTROL UNIT
5.

OPERATING LOGIC (TABLES)

The automation operates according to the settings of the operating logic.
The default operating logic is the AUTOMATIC MODE (see STARTING the system).
This section describes the operating logics available. It describes the function of operating logics under normal conditions
and in response to the following input signals: START, STOP, CLOSE, primary safety device intervention, auxiliary safety
device intervention and obstacle recognition.
LOGIC: AUTOMATIC (automatic re-closing after the pause time) (parameter LO = 0)
inpup
PEDESTRIAN
START
START
state
Opens
Opens
pedestrian
CLOSED
beam
-
-
OPENING
Depending
OPEN
on
-
in pause
parameter
time
AA
Reopens -
CLOSING
Closes
-
BLOCKED
pedestrian
Closes
o p e n i n g
(STOP)
w
stopped
Opens
PEDESTRIAN
-
completely
OPENING
Opens
Pedestrian
PEDESTRIAN
completely
reopening
CLOSING
The functioning is exactly the same as for the Automatic logic, but the following differences:
in CLOSED state the intervention of the Safety edge Auxiliary Security will BLOCK the automation.
during the CLOSING the intervention of the Photocell will BLOCK the automation as long as it is covered.
The functioning is exactly the same as for the Automatic logic, but the following differences:
the START input will mantain the automation OPEN as long as it is ENABLED (close contact), when disabled will
re-close.
STOP
CLOSE
-
-
Stops
and
Closes
blocks
Stops
and
Closes
blocks
Stops
and
-
blocks
i f
a
-
Closes
a
s
Blocks
pedestrian
Closes
beam
Blocks
pedestrian
-
beam
LOGIC: SEMIAUTOMATIC SPECIAL (parameters
LOGIC: TIMER (parameter
PTR-24
Auxiliary Security
Closing
photocell
Safety edge Photocell
-
-
Short
-
inversion and
block
Disables
the closure.
Blocks as
When
long as the
uncovered,
photocell is
will close
covered
depending on
parameter Ab
Reopens
Reopens
-
-
Short
-
inversion and
block
Reopens
Reopens
LO
=
- 28 -
OBSTACLE
DETECTED
-
-
Stops and
Short
blocks.
When
inversion
uncovered
and block
will open
Blocks as
long as the
-
photocell is
covered
Stops and
blocks.
When
Reopens
uncovered
will close
-
-
Stops and
Short
blocks.
When
inversion
uncovered
and block
will open
Stops and
blocks.
When
Reopens
uncovered
will close
LO
0
SP
1
=
and
=
)
6
)
Auxiliary
inpup
-
-
-
-
-
-
-

Publicidad

Tabla de contenido
loading

Tabla de contenido