Faber CAMINO PRO Serie Instrucciones De Instalación página 21

For Non-Ducted Recirculation venting route the ductwork to a location above the hood
where the discharge is vented back into the room.
Use the included Recirculation Vent Grill (9) to cover the opening. Secure the grill with the
2 screws (12f) provided in the Install Kit.
If the directional grille is not used, fit a straight tube at least 15" in length from the hood air
outlet to the wall unit.
Required Activated Charcoal Filter
Accessory - sku #: FILTER1
Long Lasting Activated Charcoal Filter
Accessory - sku #: FILTER1LL
(purchased separately)
Non Ducted - Recirculation Option
9
12f
21