Warning Signs; Typographical Emphasis; About This Documentation; Product Information - Hilti PD-I Manual De Instrucciones

1 Information about the documentation
1.1 Conventions

1.1.1 Warning signs

The following warning signs are used:
DANGER! Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING! Draws attention to a potentially dangerous situation that could lead to serious per-
sonal injury or fatality.
CAUTION! Draws attention to a potentially dangerous situation that could lead to slight personal
injury or damage to the equipment or other property.
1.1.2 Symbols
The following symbols are used:
Read the operating instructions before use.
On/off button
"Measure" button
Menu button
Delete (clear) button
Right arrow button
Left arrow button

1.1.3 Typographical emphasis

The following typographic features are used to emphasize important passages in this technical documenta-
tion:
1
These numbers refer to the corresponding illustrations.

1.2 About this documentation

▶ It is essential that the operating instructions are read before initial operation.
▶ The information provided in the detailed operating instructions installed in the tool as well as the
supplements and updates provided at www.hilti.com must also be observed.
▶ Always keep these operating instructions together with the tool.
▶ Ensure that the operating instructions are with the tool when it is given to other persons.

1.3 Product information

Hilti products are designed for professional use and may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must be informed of any particular hazards that may be
encountered. The product and its ancillary equipment may present hazards when used incorrectly by
untrained personnel or when used not as directed.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to enquire about the product.
Product information → page 1
Product information
Laser range meter
Generation
PD-I
01
1