Working Safely With Laser Tools; Electromagnetic Compatibility; Intended Use; Explanation Of The Display - Hilti PD-I Manual De Instrucciones

Ocultar thumbs Ver también para PD-I:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
▶ When the product is brought into a warm environment from very cold conditions, or vice-versa, allow it
to become acclimatized before use.
▶ Use the product only within its specified limits.
▶ Keep the laser exit window clean in order to avoid measurement errors.
▶ Observe the accident prevention regulations applicable in your country.

2.1.4 Working safely with laser tools

▶ Laser Class 2/Class II tools may be operated only by appropriately trained persons.
▶ Laser beams should not be projected at eye height.
▶ Precautions must be taken to ensure that the laser beam does not unintentionally strike highly reflective
surfaces.
▶ Precautions must be taken to ensure that persons do not stare directly into the beam.
▶ The laser beam must not be allowed to project beyond the controlled area.
▶ Switch the laser tool off when it is not in use.
▶ Store laser tools, when not in use, in places to which unauthorized persons have no access.

2.1.5 Electromagnetic compatibility

Although the device complies with the strict requirements of the applicable directives, Hilti cannot entirely
rule out the possibility of interference to the device caused by powerful electromagnetic radiation, possibly
leading to incorrect operation. Check the accuracy of the device by taking measurements by other means
when working under such conditions or if you are unsure. Likewise, Hilti cannot rule out the possibility of
interference with other devices (e.g. aircraft navigation equipment). The tool complies with the requirements
of class A; The possibility of interference occurring in a domestic environment cannot be excluded.
Only for Korea: This laser range meter is suitable for commercial and industrial use and for the electromagnetic
radiation encountered in this field (Class A). Users must pay attention to this point and make sure that this
laser range meter is not used in occupied living areas.
3 Description
3.1 Overview of the product
Rear contact surface
@
Reference indicator LED for rear contact
;
Left arrow button
=
Menu button
%
"Measure" button
&
Graphic display
(
Reference indicator LED for front contact
)
On/off button
+

3.2 Intended use

The product described is a laser range meter. It is designed for taking individual measurements as well as
the continuous measurement of distances.
Distances can be measured from all stationary targets without a highly reflective surface, i.e. concrete,
stone, wood, plastic, paper, etc. The use of prisms or other highly reflective targets is not permissible and, if
attempted, may falsify the results.
The product is approved for use with batteries of the type AAA.

3.3 Explanation of the display

Main menu
Measure volumes
Measure rectangular areas
Select layout function
1
Right arrow button
§
Hand strap attachment point
/
Delete (clear) button
:
¹/₄ inch thread
Folding spike
$
Laser emitting and receiving lens
£
¹/₄ inch thread
|
3

Publicidad

Tabla de contenido
loading

Tabla de contenido