Working In Automatic Mode; Working In Manual Mode - Tornado BR 40/66 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WORKING IN AUTOMATIC MODE

The automatic operation is useful to sim-
plify the operator's work.
1.Activate the machine (see under
paragraph"STARTING OF THE MA-
CHINE") putting the selector(12)into the
left position to choose the automatic func-
tion (AUTO).
2.Check that the lever (10) is in the posi-
tion of optimum flow, depending on the
type of floor and the type of dirt (see under
the paragraph "FLOW ADJUSTMENT OF
THE DETERGENT SOLUTION").
3.Selecting the forward with the selector
(8), pressing the accelerator pedal and
adjusting the speed of the forward move-
ment with the selector (9), the machine
starts to move and in automatic mode all
the working functions are activated. In
fact, automatically both the brushes base
as the squeegee go down, the brushes
begin to turn, the solenoid valve opens to
permit the detergent solution to flow down
onto the brushes and the suction system
is activated to recover the dirty water from
the floor.
Selecting the backward movement with the
selector (8) the squeegee lifts automatical-
ly and will then return to lower itself during
the next forward movement.
If the accelerator pedal is released for
more than 3seconds, automatically all the
functions are switched off and both the
brushes base as the squeegee are lifted.
Pressing the pedal again, the machine
starts to move again and in automatic
mode all the working functions are reacti-
vated.

WORKING IN MANUAL MODE

The manual model is useful when, in
special cases, it is necessary to carry
out separately only the washing with the
brushes or only the drying of the floor.
ATTENTION:
The washing and drying functions, when
they are not carried out simultaneously,
represent an improper use of the machine
(see under paragraph "GENERAL RULES
OF SECURITY"). If they are carried out
separately, it is necessary to forbid the
working areas to the passage of non-au-
thorized personnel and to signal the areas
of moist floors with suitable signs.
Activate the machine (see under para-
graph "STARTING OF THE MACHINE")
positioning the selector (12) to the right to
choose the manual mode (MAN).
TO CARRY OUT THE WASHING WITH
ONLY THE BRUSHES:
1.Activate the selector (14) of up/down of
the brushes base to lower the brushes.
Once that it is lowered, the brushes begin
to turn. The signal lamp (22) indicates that
the brushes base is in the working position,
while the signal lamp (23) signals that the
brushes are turning.
2.Press the switch (11) to open the sole-
noid valve and permit the detergent solu-
tion to lower onto the brushes. The signal
lamp (24) will come on to indicate that the
solenoid valve is open.
3.Check that the lever (10) is in the posi-
tion of optimum flow, depending on the
type of floor and the type of dirt (see under
the paragraph "FLOW ADJUSTMENT OF
THE DETERGENT SOLUTION").
TO CARRY OUT THE FUNCTION OF
ONLY DRYING:
1.Activate the selector (15) of up/down
squeegee to lower the squeegee. The sig-
nal lamp (21) indicates that the squeegee
is in the working position.
2.Press the switch (16) of the suction mo-
tors to start the suction system. The signal
lamp (18) indicates that the machine is
drying.
15
Selecting the sense of drive in forward with
the selector (8), pressing the accelerator
pedal and adjusting the speed of the for-
ward movement with the selector (9), the
machine starts to proceed and in automatic
mode all the working functions previously
set are activated.
ATTENTION:
In manual mode every function of the
machine has to be activated or deactivated
manually.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

99795

Tabla de contenido