Bradley Terreon 54 Manual Del Usario página 13

Installation
Adaptive Infrared Assembly for B and H Units and Units with
4b
Tie Pipe Option
A
Install hemmed end (not sharp end) of
support tube with gasket onto bowl .
Connect 1/2" supply tubing to sprayhead with
B
3/8" NPT to 1/2" tube connector and place
sprayhead onto support tube . Run the tubing
down through the support tube and connect
to valve tube connector .
I .R . Module Assembly
(S50-344)
Tie Bar Pre-Pack
(S45-056)
1/2" Supply Tube
Support Tube
STD (S57-005)
JUV (S57-006)
Support
Tube Gasket
(125-011)
Vented Trap
(111-024)
Pedestal Assembly
(S17-242)
Bradley • 215-1187 Rev. P; ECN 13-00-001
(107-185 (B))
(107-048 (H))
Valve Assembly
(S50-369)
Insert the 1-1/2" vent pipe (supplied by
C
installer) down through the support tube and
thread into vented trap .
Cover
Sprayhead
(S05-054)
Drain
(S45-273)
Terreon Deep Bowl (ADA bowl shown,
classic bowl is optional) Part no . varies
with color of bowl . Contact your Bradley
Access Panel
(186-1456)
B/H
(B Shown)
TDB3108, WF3208
Actuator
Module
Assembly
Sprayhead
Supply Tube
Section View of
B/H Unit Assembly
Rep . for assistance .
4/30/2013
Cover
Tie Bar
13