Harbor Breeze LP8294LBN Manual Del Usuario página 10

INITIAL ASSEMBLY INSTRUCTIONS
10. Thread the downrod (C) into the downrod support of
the motor (A). Align the holes in the downrod support
of the motor (A) with the holes in the downrod (C)
and re-install the downrod pin (JJ). Secure the
downrod pin (JJ) with the downrod clip (II). Re-install
the two downrod support set screws (EE) and tighten
securely in the downrod support of the motor (A).
WARNING: It is critical the downrod pin (JJ) is
properly installed and the downrod support set screws
(EE) are securely tightened. Failure to do so could result
in the fan falling.
Hardware Used
Downrod Support
EE
Set Screw
II Downrod Clip
JJ Downrod Pin
11. Route the wires through the motor coupling cover (F),
canopy screw cover (E) and ceiling canopy (D).
10
C
EE
x 2
x 1
x 1
11
10
JJ
II
JJ
A
Lowes.com/harborbreeze
II
D
E
F