Correction Of Malfunctions; Technical Data; Accessories - WAGNER STEAMFORCE PRO Guia Del Usuario

EN

16. Correction of Malfunctions

Malfunction
Unit fails to boil
Unit keeps cutting
out
Steam escaping
from pressure cap
If the unit still will not operate return the unit to the dealer or authorised agent
i
for investigation.

17. Technical Data

Power source:
Steaming time:
Boiler capacity:
Max persons:

18. Accessories

Further information about the WAGNER range of products for decorative preparation is
available on www.wagner-group.com.
12
Cause
•
The thermal cut-out has operated
•
Usage of an extension lead
•
Water is below MIN level
•
Usage of an extension lead
•
Additives have been used
•
Blockage in hose or steamplate
•
Build up around cap area
220-240 V ~ 50Hz Power consumption: 2750W
80-100 Minutes
7.5L
1
Remedy
Hose length:
Unit weight:
Max standing weight: 127kg
SteamForce Pro
Switch off, allow to
cool, refill with water
then switch on again
Check that the thermal
reset button has not
tripped out.
Check that the
extension lead is rated
at minimum of 15
Amps (EU)/ 13 Amps
(UK) - 230V unit only
and fully unwound.
Refill water
See above
Refresh water
Remove blockage
Clean seating around
cap area
5 m
9.4kg