Parts and their functions
wFront panel switches
$ ZOOM REVERSE [NOR/REV] switch (Setting at shipment: NOR)
This is used to select the lens zoom operation which is to be performed by operating the
ZOOM lever.
When it is set to NOR, the zoom moves toward the telephoto end when the ZOOM
lever is tilted toward TELE or it moves toward the wide-angle end when the lever is tilted
toward WIDE.
When it is set to REV, the zoom operates in the reverse directions.
% ZOOM/FOCUS EXCHANGE [ON/OFF] switch (Setting at shipment: OFF)
This is used to select the ZOOM lever and FOCUS lever functions. When it is set to OFF,
the ZOOM lever adjusts the zoom operation of the lens, and the FOCUS lever adjusts its
focus operation.
When it is set to ON, the ZOOM lever adjusts the focus operation of the lens, and the
FOCUS lever adjusts its zoom operation.
& FOCUS REVERSE [NOR/REV] switch (Setting at shipment: NOR)
This is used to select the lens focus operation which is to be performed by operating the
FOCUS lever.
When it is set to NOR, the point at which the lens is focused moves further away when
the FOCUS lever is tilted toward FAR, and it comes closer when the lever is tilted toward
NEAR.
When it is set to REV, focusing operates in the reverse directions.
14 (E)