Panasonic AW-RP555L Manual De Instrucciones página 7

Parts and their functions
CAM CONT switch
This switch is used to turn the control panel's camera control functions ON or OFF.
ON: Camera control is enabled (turned on).
OFF: Camera control is disabled (turned off).
The following functions can be turned on and off using the CAM CONT switch.
GAIN, MODE, SHUTTER, WHT BAL [A, B, ATW], AWC, ABC, SCENE FILE [USER,
1, 2, 3], MENU/ , ITEM/ , YES/
GAIN [AUTO/MANU] button
This is used to select the gain control mode of the camera in the pan/tilt head system
currently selected. Each time it is pressed, the mode is switched by one step in the
sequence of the auto mode and manual mode [0 dB, L (9 dB) and H (18 dB)].
If a setting other than 0 dB, 9 dB or 18 dB has been selected for the gain in the manual
mode using the camera menu, it will be changed to the setting established by the
operation of this button.
In the auto mode, the button's lamp lights; in the manual mode, it goes off.
MANU [L, H] lamp
These lamps turn on and off as follows when a MANU gain setting has been selected
using the GAIN button.
0 dB L lamp off
9 dB L lamp on
18 dB L lamp off
When a setting other than the above has been selected using the camera menu, both
the L and H lamps turn on.
MODE [BAR/CAM] button
This is used to select the camera's video output signals in the pan/tilt head system
currently selected.
Each time it is pressed, the camera's colour bar signals or video signals are selected in
turn.
When the colour bar signals are selected, the button's lamp comes on; when the video
signals are selected, it goes off.
, NO/
H lamp off
H lamp off
H lamp on
6 (E)