(4.4) Replacement Blades - Evolution R355CPS Instrucciones Originales

cause risk of injury to persons.
18. Never stand on the tool serious injury
could occur if the tool is tipped or if the cutting
tool is unintentionally contacted.
19. Check damaged parts. Before further use
of the tool, a guard or other part that is damaged
should be carefully checked to determine that it
will operate properly and perform its intended
function - check for alignment of moving parts,
binding of moving parts, breakage of parts,
mounting, and any other conditions that may
affect its operation. A guard or other part that
is damaged should be properly repaired or
replaced.
20. Direction of feed. Feed work into a blade
or cutter against the direction of rotation of the
blade or cutter only.
21. Never leave tool running unattended.
Turn power off. Don't leave the tool until it
comes to a complete stop.
(4.1) GETTING STARTED - UNPACKING
Caution: This packaging contains sharp
objects. Take care when unpacking. Remove
the machine, together with the accessories
supplied from the packaging. Check carefully
to ensure that the machine is in good condition
and account for all the accessories listed in this
manual. Also make sure that all the accessories
are complete.
If any parts are found to be missing, the machine
and its accessories should be returned together
in their original packaging to the retailer.
Do not throw the packaging away;
keep it safe throughout the guarantee period.
Dispose of the packaging in an environmentally
responsible manner.
Recycle if possible.
Do not let children play with empty plastic bags
due to the risk of suffocation.
SERIAL NO. / BATCH CODE
The serial number can be found on the motor
housing of the machine.
For instructions on how to identify the batch
code, please contact the Evolution Power Tools
helpline or go to:
www.evolutionpowertools.com
www.evolutionpowertools.com
ITEMS SUPPLIED
(4.2)
Description
R355CPS Saw
Instruction Manual
14" (355mm)
Multi-Material TCT Blade
Hex Key 8mm (Blade Change)
V-Block
REPLACEMENT BLADES
(4.4)
Description
14" (355mm)
Multi-Material Cutting
TCT Blade
14" (355mm)
Diamond Blade
14" (355mm) Mild Steel
Cutting Blade
14" (355mm) Stainless
Steel Cutting Blade
14" (355mm) Thin Steel
Cutting Blade
14" (355mm) Aluminium/
Aluminum Cutting Blade
14" (355mm) Wood Cut-
ting Blade
15" (380mm) Mild Steel
Cutting Blade
NOTE: This machine is supplied with 2 accessories.
The 8mm hex key should be kept in the dedicated
tool storage located in the front of the base when
not in use. The V-block adaptor should be used
where possible, and kept safely away from the
machine when not in use.
10
Quantity
1
1
1
1
1
Part No
(UK/EU) RAGEBLADE-
355MULTI
(USA) RAGE355BLADE
(UK/EU) RAGEBLADE-
355DIAMOND
(USA) 14BLADEDM
(UK/EU) 66TBLADE
(USA) 14BLADEST
(UK/EU) 90TBLADE
(USA) 14BLADESS
(UK/EU) EVO-
BLADE355TS
(USA) 14BLADETS
(UK/EU) 80TBLADE14
(USA) 14BLADEAL
(USA) 14BLADEWD
(USA) 15BLADEST