Electric Connection; Operation - Bartscher 2Z 126FL Manual De Uso

5.2 Electric connection

DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!

Wait 12 hours before connecting the device to the socket, connect it, and place the
wine bottles inside.

The power supply circuit with the socket must be protected by the fuse of at least
16A. The device should be connected directly to the wall socket. Due to fire hazard
do not use any adapters or extension cords.
The electric safety of the device may be assured only when it is connected to
correctly realized electric system with the protective wire. It is forbidden to connect
the device to the socket without the protective wire. When in doubts, the house
electric system should be checked by the qualified technician. The manufacturer is
not responsible for damages caused by connecting the device to the missing or
interrupted protective wire.

5.3 Operation

Control elements and display
Temperature increase button
Temperature decrease button
A
Digital display
Internal light ON/OFF switch
ON/OFF button
A
5
- 35 -